Laserfiche WebLink
Heavy Equipment - The hazards of operating heavy equipment (i.e. excavators, loaders, <br /> demolition saws) include loss of equipment control while operating, excessive noise, and "run- <br /> away" equipment during non-operational periods. The following hazard controls will be <br /> implemented: <br /> • Each operator will be instructed in and qualified for each type of heavy <br /> equipment machinery he is to operate; <br /> • At the beginning of each shift, check that the brakes, tires, horn, steering <br /> mechanism, coupling devices, seat belts, operating control and safety devices <br /> are in safe operational conditions and free of apparent damage; <br /> • The parking brake will be set whenever equipment is parked. The outriggers <br /> will be lowered to the ground while the backhoe is excavating and the bucket <br /> will be lowered when not in use; <br /> • A safe distance between operating equipment and ground personnel will be <br /> maintained; <br /> • Adequate clearances will be maintained from electrical sources; <br /> • Hard hats and steel-toed boots will be worn during heavy equipment activity. <br /> If necessary, ear plugs and safety glasses will be donned; and <br /> • The speed limit for the site will be adhered <br /> 2.2.5 Noise <br /> It is anticipated that noise exposure may be a possible hazard due to operation of heavy <br /> equipment. At the discretion of the SSHO, a sound level meter may be used during field <br /> activities. Hearing protection, ear plugs and ear muffs, will be used if noise levels exceed 85 <br /> dBA. <br /> 2.2.6 Slip, Trip, and Fall <br /> All on-site personnel will be made aware of protruding objects or uneven terrain at the site. <br /> Risks may come from tripping or falling over obstacles, pipes, or tools. Personnel must maintain <br /> a clear footing and identify obstructions, holes, and other tripping hazards at the job site. In the <br /> Rough&Ready Island 7 Tetra Tech,Inc. <br /> Revised Draft HSP November 18, 1998 <br />