Laserfiche WebLink
wil <br /> R ��� ". I <br /> SHERWOOD LABS CORPORATION <br /> Ouallty Control Program <br /> Page - 3 <br /> c, i0% of all samples analyzed are standards. Reproducibility <br /> of eQuivalent standards for a sample batch is maintained <br /> within +/- i0% of the initial standard injection value. <br /> Failure to meet this requirement will result in the re- <br /> running or the affected sample batch. <br /> d. 10% of all samples shall be chosc , at random for <br /> preparation as matrix spike/matrix spike duplicates. <br /> SPikeo samples are included with the associated sample <br /> batch or within 24 hours of analyzing the original samples. <br /> Recoveries for all spike samples are tabulated to determine <br /> average (R) and the standard deviation (STD) determined <br /> using the results of at least 30 analyses. Recoveries are <br /> matrix dependent. Acceptable recovery limits are <br /> established for each matrix of interest and are based on <br /> R +/- 3 STD for establishing control limits (UCL and LCL ). <br /> e. All samples and blanks are spiked with a compound(s) other <br /> than the analyte(s ) of interest to monitor the analytical <br /> procedure. Recoveries are determiner+ and accounted for <br /> when the analytical data is compiled. <br /> 3. COLUMN PERFORMANCE <br /> 1 New columns are qualified by evaluating standard solutions <br /> supplied by equipment and column manufacturers and calibration <br /> and control standards prepared in the laboratory. An ongoing <br /> Program for evaluation of column performance includes <br /> monitoring of the following parameters: <br /> a. Tabulation of standard peaksls) retention times (windows) . <br /> b. Visual monitoring of standards for evaluation of Peak(s) <br /> resolution. <br /> In the event that problems are detected than can be related to <br /> the column the integrity of other instrument Components <br /> including detector response, instrument gases and fittings are <br /> examined. Failure to identify a problem with these other <br /> areas will result in the replacemsrt of the column and <br /> initiation of the column ouaiification scheme. <br />