Laserfiche WebLink
Levine-Fricke-Recon • <br /> Section: 6 <br /> Date Initiated: September 23, 1996 ' <br /> Revision No.: 1 <br /> Date Revised:August 21, 1998 <br /> Page 16 of 34 <br /> 6.0 WORK ZONES AND DECONTAMINATION PROCEDURES ' <br /> 6.1 Purpose <br /> Controls must be implemented in each work area for site activities outlined in ' <br /> Section 3, to minimize potential worker exposure to any chemicals present and to limit <br /> chemical transport from the work area by personnel or equipment. ' <br /> 6.2 Control System ' <br /> A control system is required to ensure that personnel and equipment working on <br /> hazardous waste sites are subjected to appropriate health and safety surveillance and , <br /> work area access control. <br /> The possibility of exposure or translocation of contaminants will be reduced or , <br /> eliminated in a number of ways, including: <br /> • Setting security or physical barriers at control points to regulate and/or exclude ' <br /> unnecessary personnel from the general area. <br /> • Minimizing the number of personnel and equipment in the work area, consistent <br /> with effective operations. <br /> • Establishing work zones, where appropriate, within the work area. <br /> • Conducting operations in a manner that will reduce the exposure of personnel and , <br /> equipment. <br /> • Minimizing the airborne dispersion of contaminants (using dust control ' <br /> procedures). <br /> • Implementing appropriate decontamination procedures for both personnel and <br /> equipment. ' <br /> 6.3 Field Operation Work Zones t <br /> Work zones will be established based on anticipated contamination and projected work <br /> activities. Within these zones, prescribed operations will occur using appropriate PPE. , <br /> Movement between zones will be controlled at checkpoints. The planned zones are: <br /> • Exclusion Zone <br /> • Contamination Reduction Zone , <br /> Page F-16 RIFSWP-AppF-Rev1-04111:SRL , <br />