COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

01 August 2019 AdvancedGeo AGE Project No. 05-1278 Environmental Page 10 of 23 and provides an effective means of verifying container integrity, as noted by EPA in the preamble to the SPCC rule at 67 FR 47120. 3.2. FACILITY LAYOUT DIAGRAM - 40 CFR 112.7(a)(3) Figure 1 shows the general location of the Facility on a U.S. Geological Survey topographic map. Figure 2 presents a layout of the Facility and the location of storage tanks and drums. The diagram also shows the direction of surface water runoff. As required under 40 CFR 112.7(a)(3), the Facility diagram indicates the location and content of ASTs, transfer stations and connecting piping. 3.3. SPILL REPORTING - 40 CFR 112.7(a)(4) The discharge notification form included in Appendix D is completed upon immediate detection of a discharge and prior to reporting a spill to the proper notification contacts after evaluation by Facility Management and as applicable to limits described in Section 1.4.4. 3.4. POTENTIAL DISCHARGE VOLUMES AND DIRECTION OF FLOW - 40 CFR 112.7(b) Table 5 presents expected volume, discharge rate, general direction of flow in the event of equipment failure and means of secondary containment for different parts of the Facility where oil and/or petroleum fuel is stored, used, or handled. 3.5. CONTAINMENT AND DIVERSIONARY STRUCTURES - 40 CFR 112.7(c) Methods of secondary containment at the Facility include a combination of structures (e.g., berm and built-in secondary containment) and land-based spill response (e.g., booms and absorbents) to prevent oil and/or petroleum fuel from reaching navigable waters or adjoining shorelines. 3.5.1. Spill Pallets 55-gallon drums are kept on spill pallets. Each spill pallet, if employed, has a minimum 110% containment capacity, which can effectively contain the volume of any single 55-gallon drum or equivalent for a two drums spill pallet.