Laserfiche WebLink
i <br /> Governing Regulation <br /> 22 CCR Section 66265.192-Design and Installation of New Tank Systems or <br /> Components, is found in the following regulatory pathway(See Attachment A for text of <br /> citation): <br /> Title 22. Social Security Division / 4.5. Environmental Health Standards For <br /> The Management Of Hazardous Waste/Chapter 15. Interim Status Standards <br /> For Owners And Operators Of Hazardous Waste Transfer, Treatment, <br /> Storage, And Disposal Facilities / Article 10. Tank Systems / 66265.192. <br /> Design and Installation of New Tank Systems or Components. <br /> Safeway's correspondence and discussions with the SJCEHD confirmed the above regulation <br /> citation governs the assessment for the used oil storage tank system. Subsection(k)of section <br /> 66265.192 outlines 11 informational needs or documentation steps required for the assessment <br /> and certification. The following sections summarize the information and steps taken by <br /> Safeway to complete,compile,or test components to satisfy each of the 11 subsections. <br /> Assessment <br /> The structure of the assessment in the following paragraphs matches the 22CCR 66265.192 <br /> (k) "The tank system assessment shall include the following information:"format. Table 1 <br /> summarizes specific information for each of the 11 categories. <br /> Lk) () tank configuration and gross capacitx <br /> Used Oil Tank: <br /> 1,000 gals <br /> Horizontal Cylindrical Type: <br /> Shell: steel, single-walled,prime coated <br /> nominally 8'-1"long x 56"diameter <br /> Location: Indoors within Oil Storage Area of the Truck Repair <br /> Seismic Lateral Restraint System installed—See Tank Drawings Attachment C <br /> 0 (2)design standards) <br /> See Table 1 for descriptions regarding the following 4 design and construction subsections: <br /> (A) material of construction; <br /> (B) material thickness and the method used to determine the thickness; <br /> (C) description of tank system piping(material, diameter); <br /> (D) description of any internal and external pumps; <br /> (E)sketch or drawing of tank including dimensions. <br /> The tank has a manufacturer's label—information as follows: <br /> The tank was manufactured by Arrow Tank Works,Anderson,CA. It is single-walled <br /> steel, constructed to UL standards. The tank is designed and constructed for flammable <br /> and combustible liquids. The tank walls are 10 gauge steel and compatible with used <br /> oil. <br /> Tank System Assessment Page 2 <br /> June 2011 <br />