WORK PLANS_CASE 1 - Laserfiche WebLink

Home Browse Search

SF_NT BY:EMCON ASSOCIATES :12-13-94 11:13 EMCON SACRAMENTO— 12094640138:# 6f 7 y • I 9. Appropriate work areas designates for support, contaminant reduction, and exdusion will be maintained. 10. EMCON Associates nn site persomwl are to be thoroughly briefed on the arrucipawd hazards, equiprnelnt requirennents, safety practices, emergency procedures and communications mrtllods,initially and in daily briefing. H. Sorel toes vinyl boots will be worn on site at alltimes. 12. A multipurpose portable fine extinguisher shall be located on the drilling rig.. 13. All operat io nis personnel will, whenever possible, locate the drilling,equipment and themselves so that.they will maintain an upwind positioriL 14 Drilling shall not be conducted at any location until the area proposed for drilling has been cleared by a utility locator flim to i e.1me of buried obstruction such as power lines,gas lines,etc. Safety Practices for Drift Rig Operations In addition,the following precautions shall be adhered to by the drill rig operator. L Before radsing the drill rig mast in the vkb*y of ckx*dcal power lines, the operater.shall walk coTMIctely around the drill rig to determine the diswce of the rig to the nearest power line when the mast is being raised.(shote be greater than 2.0 fleet). Any questions regarding the appropriateness of a drilling location should be brought to the attention of the.On-sine Safety Coordina wr. 2. Before drilling, the location must be adequately cleaned and leveled to acconuncdate the drill trig. 3. Housekeeping; Suitable storage for all tools, materials and supplies s!»ll .be provided. Pipe,drill rods,casings,angers and similar drilling tools shall be stacked in an ardedy manner to prevent rolling,spreading or sliding. 4. Work areas and drilling platforms shall be kept free of materials, obstructions and substances that could cause a surface to becorm slick or otherwise hazardous. adm)bWh V4&&.Plan.mw PU*.U Du mbar 13,1494 - 5