Laserfiche WebLink
1 SECTION 02445 <br /> 3 CHAIN LINK FENCE <br /> 4 <br /> 5 <br /> 6 PART 1 - GENERAL <br /> 7 <br /> 8 1.01 DESCRIPTION <br /> 9 <br /> 10 The work of this section consists of furnishing and installing chain link fencing and gates <br /> 11 as shown and called for on the Drawings. <br /> 12 <br /> 13 1.02 RELATED WORK SPECIFIED ELSEWHERE <br /> 14 <br /> 15 Section 03100: Concrete <br /> 1 16 <br /> 17 1.03 SAMPLES AND APPROVAL OF MATERIALS <br /> 18 <br /> 19 Certificates of compliance indicating that the materials conform to the requirements of these <br /> ' 20 Specifications shall be submitted and approved prior to any fabrication or installation. <br /> 21 <br /> 22 <br /> 23 PART 2: MATERIALS <br /> 24 <br /> 25 2.01 STANDARDS <br /> 26 <br /> 27 Metal posts, fabric, braces and attachments shall conform to the requirements of Caltrans <br /> 28 Standard Specification Section 80-4, except as specified herein. <br /> 29 <br /> 30 2.02 CHAIN LINK FABRIC <br /> 31 <br /> 32 A. 9 gauge, 2 inch mesh, height as shown on the Drawings. <br /> 33 <br /> 34 B. Zinc coated steel wire fabric. <br /> 35 <br /> 36 2.03 BARBED WIRE <br /> 37 <br /> 38 A. 15 gauge (minimum) wire with 14 gauge, 4 point barbs spaced 3 inches apart. <br /> 39 <br /> 40 B. Galvanized steel, ASTM A-121. <br /> 41 <br /> 42 2.04 GATES <br /> 43 <br /> as A. Shall meet requirements of Caltrans Standard Specification Section 80 - 4.01D. Fabric per <br /> 45 paragraph 2.02 above. <br /> 46 <br /> 1 47 B. Provide gate holders. <br /> 48 <br /> 49 C. Malleable or galvanized steel locking devices. <br /> so <br /> CHAIN LINK FENCE <br /> 1 042894 02445-1 <br />