Laserfiche WebLink
i <br /> SECTION 05500 <br /> 2 <br /> 3 METAL FABRICATIONS <br /> 4 <br /> 5 <br /> 6 PART 1 : GENERAL <br /> 7 <br /> s 1.01 DESCRIPTION <br /> 9 <br /> 10 The work of this section consists of providing miscellaneous metal work shown on the <br /> 11 Drawings, as specified herein, and as needed for a complete and proper installation. <br /> 12 <br /> ' 13 1.02 RELATED WORK SPECIFIED ELSEWHERE <br /> 14 <br /> 15 A. Section 09900: Painting <br /> ' 1s <br /> 17 1.03 QUALITY ASSURANCE <br /> 18 <br /> 19 A. Use adequate numbers of skilled workmen who are thoroughly trained and experienced in <br /> 20 the necessary crafts and who are completely familiar with the specified requirements and <br /> 21 the methods needed for proper performance of the work of this section. <br /> 22 <br /> ' 23 B. Perform shop and/or field welding required in connection with the work of this section in <br /> 24 strict accordance with pertinent recommendations of the American Welding Society. <br /> 25 <br /> ' 26 1.04 SUBMITTALS <br /> 27 <br /> 26 A. Comply with pertinent provisions of Section 01300. <br /> 29 <br /> 30 B. Product data to be submitted: <br /> 31 <br /> 32 1. Materials list of items proposed to be provided under this Section; <br /> 33 <br /> 34 2. Manufacturer's specifications and other data needed to prove compliance with the <br /> 35 specified requirements; <br /> 36 <br /> ' 37 3. Shop Drawings in sufficient detail to show fabrication, installation, anchorage, and <br /> 36 interface of the work of this Section and the work of adjacent trades; <br /> 39 <br /> 40 4. Manufacturer's recommended installation procedures which, when approved by the <br /> 41 Engineer, will become the basis for accepting or rejecting actual installation <br /> 42 procedures used on the work. <br /> 43 <br /> 44 <br /> 45 PART 2: MATERIALS <br /> 4s <br /> 47 2.01 MATERIALS <br /> 4s <br /> 49 A. In fabricating items which will be exposed to view, limit materials to those which are free <br /> 50 from surface blemishes, pitting, rolled trade names, and roughness. <br /> ' METAL FABRICATIONS <br /> 062794 05500-1 <br />