Laserfiche WebLink
1 <br /> 1 the reference specifications and standards contained herein. <br /> 2 <br /> 3 1.09 SPARE SUPPLIES <br /> 4 <br /> s Provide one unbroken gallon container of each color and type of paint and each type of <br /> s solvent and thinner required by the specifications. These spare paint supplies shall be <br /> ' 7 stored as required in paragraph 09900-1.07 until delivery is requested by the Engineer. <br /> a <br /> s <br /> 10 PART 2: MATERIALS <br /> 11 <br /> 12 2.01 PAINT AND FINISH PRODUCTS <br /> 13 <br /> 14 A. Paint and coating products shall be fresh and well ground; shall not settle readily, cake, <br /> 1s or thicken in the container; shall be broken up readily with paddle to a smooth consistency; <br /> 16 and shall have easy application properties. Other painting materials such as linseed oil, <br /> 17 turpentine, mineral spirits, miscellaneous thinners, varnish, and shellac shall be of the <br /> 1s highest quality. <br /> 1s <br /> 20 B. All paints and coatings shall be specifically manufactured for use on projects of this type, <br /> 21 and shall be used on surfaces intended by the paint manufacturer. Paints and coatings <br /> 22 shall be Tnemec, Devoe, Ameron, Koppers, or equal. All paint and coatings shall be <br /> 23 delivered in original containers, with seals unbroken. <br /> 24 <br /> 25 C. For ease of reference, several specific paint and coating products are listed in the coating <br /> 26 System Index under 2.05, this section. <br /> ' 27 <br /> ze 2.02 COMPATIBILITY OF SHOP AND FIELD PAINTS <br /> 29 <br /> 30 To ensure a satisfactory painting job it is essential that the paints applied in the shop and <br /> 31 in the field be mutually compatible. Determine what shop paints have been used and <br /> 32 select approved field paints compatible therewith. <br /> 33 <br /> 34 2.03 COLORS <br /> 35 <br /> 36 Color for the various surfaces to be painted shall be selected by the Engineer. Use of <br /> 37 different colors for the various structures or for surfaces of a single structure may be <br /> ' 38 directed by the Engineer. <br /> 39 <br /> 40 2.04 SHOP PRIMERS <br /> 49 <br /> az Where prime coats are shop applied, instruct suppliers to provide compatible primers with <br /> 43 the finish coats selected. In no case will primers be allowed that are not manufactured by <br /> 44 the suppliers of the finish coats. <br /> 4s <br /> 46 2.05 SYSTEMS INDEX <br /> 47 <br /> ' 48 A. System A <br /> 49 <br /> so 1. Type of Coating: Epoxy Coating <br /> ' 51 <br /> PAINTING <br /> 1 042894 09900-3 <br />