Laserfiche WebLink
1 <br /> SECTION 10701 <br /> 3 WORK BENCHES <br /> 4 <br /> 5 <br /> 6 PART 1: GENERAL <br /> 7 <br /> 8 1.01 DESCRIPTION <br /> 9 <br /> 10 The work of this section consists of furnishing and installing work benches. <br /> 11 <br /> 12 1.02 SUBMITTALS <br /> 13 <br /> 14 In accordance with Section 01300, submit shop drawings: <br /> 15 <br /> ' 16 1. List type, size, and location of each required work bench. <br /> 17 <br /> 18 2. Indicate type, dimensions, thicknesses and/or gages of all materials, and type and <br /> 19 location of all hardware. <br /> zo <br /> 21 3. Indicate all rough-in and installed dimensions, and type, size and location of all <br /> 22 anchorages. <br /> 23 <br /> 24 <br /> 25 PART 2: MATERIALS <br /> 2s <br /> 27 2.01 WORK BENCHES <br /> 28 <br /> 29 A. Factory-built steel workbench, with steel shelf, stringer, riser, back and end stops and 4 <br /> 30 bench drawers. <br /> 31 <br /> 32 B. 72" wide x 28" deep x 34" high. <br /> 33 <br /> 34 C. 1-3/4" thick composition top, Lyon "Super Comp-Top"; Republic No. 401259, or equal. <br /> 35 <br /> 36 D. Electrical outlet strip, 72" long, 8 outlets, 15 amp, 120 volt, Lyon no. 2663, or equal. <br /> 37 <br /> 38 E. Color as selected by Engineer. <br /> 39 <br /> ' 40 F. Lyon Metal Products No. 2499; Republic Storage Systems Co. No. 4727, or equal. <br /> 41 <br /> 42 <br /> 43 PART 3: EXECUTION <br /> 44 <br /> 45 3.01 SURFACE CONDITIONS <br /> 46 <br /> 47 Examine the areas and conditions under which work of this Section will be performed. <br /> 48 Correct conditions detrimental to timely and proper completion of the work. Do not proceed <br /> 49 until unsatisfactory conditions are corrected. <br /> 50 <br /> WORK BENCHES <br /> 042894 10701-1 <br /> 1 <br />