Laserfiche WebLink
t <br /> SECTION 10670 <br /> 3 STORAGE SHELVING <br /> 4 <br /> 5 <br /> 6 PART 1: GENERAL <br /> 7 <br /> 8 1.01 DESCRIPTION <br /> 19 <br /> 10 The work of this section consists of furnishing and installing storage shelving. <br /> 11 <br /> 12 1.02 SUBMITTALS <br /> 13 <br /> 14 In accordance with Section 01300, submit shop drawings: <br /> 1s <br /> 16 1. List type, size, and location of each required storage shelving unit. <br /> 17 <br /> is 2. Indicate type, dimensions, thicknesses and/or gages of all materials, and type and <br /> 19 location of all hardware. <br /> 20 <br /> 21 3. Indicate all rough-in and installed dimensions, and type, size and location of all <br /> 22 anchorages. <br /> 23 <br /> 24 PART 2: MATERIALS <br /> 25 <br /> 26 2.01 STEEL STORAGE SHELVING UNITS <br /> 27 <br /> 26 A. Factory-built, closed steel, seven shelf units, Lyon Metal Products catalog no. 8561X; <br /> 29 Republic Storage Systems, or equal. Color as selected by Engineer. <br /> 1 30 <br /> 31 B. 36" wide x 18" deep x 84" high. <br /> 32 <br /> 33 C. 18-gauge reinforced shelves. 1300 pounds dead weight evenly distributed over the shelf <br /> 34 area including a 1.65 safety factor. <br /> 35 <br /> 36 PART 3: EXECUTION <br /> 37 <br /> 38 3.01 SURFACE CONDITIONS <br /> 39 <br /> ao Examine the areas and conditions under which work of this Section will be performed. <br /> 41 Correct conditions detrimental to timely and proper completion of the work. Do not proceed <br /> 42 until unsatisfactory conditions are corrected. <br /> 43 <br /> 44 3.02 INSTALLATION <br /> 45 <br /> 46 Install the shelving units where shown on the Drawings and in strict accordance with the <br /> 47 manufacturer's installation recommendations as approved by the Engineer, anchoring firmly <br /> 46 into position, including seismic bracing, for long life under hard use. <br /> 49 <br /> ' 50 END OF SECTION <br /> STORAGE SHELVING <br /> 042894 10670-1 <br />