COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

PERMIT NO.: 1019-6SV-0674 PERMITTEE: Ground Zero Analysis, Inc. DATE: October 22,2019 Permittee's attention is directed to Section 6, "CONTROL OF MATERIALS", of the State Standard Specifications Reference to Engineer in the State Standard Specifications shall include State Representative. "Your attention is directed to Standard Specification, Section 5-1.36 Property and Facility Preservation, and Business and Professions Code, Section 8771. Permittee shall physically inspect the work site and locate survey monuments before work commencement. Monuments that might be disturbed shall be referenced or reset in accordance with Business and Professions Code." "If feasible, monuments should not be set within the traveled way. All monuments that must be set or perpetuated in paved surfaces, shall be constructed in accordance with Caltrans Standard Specification Section 81 'monuments' and Standard Plan A74, Type D, or equal with prior approval of the District Surveys Engineer." "Copies of Corner Records filed or Record of Surveys recorded in compliance with the Business and Professions Code shall be forwarded to the District Surveys Engineer." Except when necessary, as determined by the State Representative, no installation, construction equipment or personal vehicles shall operate or park within the traveled way. All work shall be conducted in such a manner that the excavation, excavated earth, materials and equipment will not cause any inconvenience to the highway traffic or to traffic entering the highway from any public or private approach. No earth or construction materials are to be dragged or scraped across the highway pavement. No excavated earth shall be placed or allowed to remain at a location where it can be tracked onto the highway traveled way or any public or private approach by the Permittee's construction equipment, or by traffic entering or leaving the highway traveled way. Any excavated earth or mud so tracked onto the highway pavement or public or private approach shall be immediately removed by the Permittee. In addition to the attached General Provisions, the following special provisions are also applicable: 1. Unless specifically authorized elsewhere in this permit, survey work shall not be performed: A. On holidays of an afternoon proceeding a holiday. B. In medians. C. When work requires traffic control on traveled lanes. 2. Permittee shall furnish, place, and maintain required signs, safety equipment, traffic control, and warning devices in accordance with Caltrans Manual on Uniform Traffic Control Devices 2014. 3. All personnel shall wear hard hats and class 3 vests, shirts or jackets as appropriate. 4. Unless specifically authorized in this permit, survey markings within the right of way shall be temporary. Paint used for markings shall be water-soluble and other markers shall be removed upon completion of survey. 3of4