ARCHIVED REPORTS_REMOVAL ACTION COMPLETION REPORT

Home Browse Search

Section 2 Pump Specifications Description Model:L-4 Design and Features Total Flow Range:0.005-4 LPM(5-4000 cc/min) The main purpose of this battery-operated personal sampling pump is to Flows 5-800cc/m requires Universal Low Flow Holder APB-109030 draw contaminants from an air sample into, onto or through a sampling media such as 25 and 37mm filter cassettes, adsorbent sample tubes, LED's Operational Function impingers,long-duration color detector tubes to gauge personnel exposure Green LED is ON and pump is running to gases, vapors, particulates, aerosols, etc. Both the analytical method Orange LED on indicates flow fault required for the contaminant and the type(s) of contaminants sampled Red LED indicates a low battery determine the selection of sampling media. Many sampling methods Data Storage: Last flow rate setting is saved into the circuit board specify the use of filters for collection.(ie.Asbestos and Lead). The pore memory for next sampling size, filter diameter, and filter material affect the ability of the sample pump to draw air through the filter for contaminant collection. Power: Rechargeable NIMH Batteries:4.8V,2.15 Ah The BUCK-LibraTm Model L4 Abatement Air Sampler consists of a pump Operating Temperature Limits: 32°F to 104°F (0°C to 40'C) contained in a Lexan case,electronic circuit board for flow control,a single Case: Polycarbonate steel fiber filled*RFI-shielded and antistatic diaphragm pump mechanism and a rechargeable Nickel Metal Hydride battery pack. Size:4.5"H x 4"W x 2"D 11.4 cm H x 10.2 cm W x 5 cm D Features: Weight: 19 oz (5398) • Conforms to ANSI/ISA-12.12.01-2000:This apparatus is suitable for use in Class I and 11,Division 2 and Class 111, Battery Pack Divisions I and 2 Hazardous(Classified)Locations. The BUCK-Libra Series Standard Battery Pack consists of four Nickel • Certified to CAN/CSA Standard CSA-C22.2 No.213-M 1987 Metal Hydride cells batteries.The batteries are rated at 2150mA hour ca- Suitable for use in Class 1,Division 2 Hazardous location. pacity.The QuickOnell and QuickFiveTM Battery Chargers connect to the back of each battery case;by lifting the protective rubber cover,the charger • Compact,Rugged and quiet lead can be easily inserted. A Triple Battery Pack may be substituted for • No tools required to change flow rates. the standard battery pack to provide three times as much battery capacity for the Libra.When a Battery Pack or pump with Battery Pack is connected • Battery pack rechargeable while attached or separately to a BUCK QuickOneTM or QuickFiveTM Charger, a yellow LED • Stainless steel belt clip with built-in tripod connector (CHARGING)will indicate the charging cycle has begun.The charge cy- cle takes one hour for the single packs and 6 hours for the triple packs. • One-hour rechargeable batteries and optional extended run triple packs When the charging cycle is completed,a green LED will light(READY) • High impact steel fiber filled Lexan case,antistatic and RFI shielded indicating end of cycle.Individual battery packs may be charged independ- ently of the pump if required. The pump may be left connected to the • "Auto-restart"within one minute of a flow fault and automatic reset charger in"trickle charge"indefinitely.Battery pack cases are connected to • Flows up to 4 LPM for special cyclone requirements the pump case bottom with four self-retaining screws. • Dual flow range easily handles filters,impingers,cyclones,and tubes WARNING:EXPLOSION HAZARD.DO NOT DISCONNECT BATTERY UNLESS THE AREA IS KNOWN TO BE FREE OF • High backpressure capable for 25mm 0.45 micron asbestos filters IGNITBLE CONCENTRATIONS OF FLAMMABLE GASES OR • One year warranty VAPORS. 6 7