Laserfiche WebLink
4. NEXT ET 06:12:49 This screen shows the elapsed <br /> ST 08:18:26MAY15 run time (ET) and the run <br /> start time/date (ST). <br /> 5. NEXT MAX: 0.113 mg/m3 This screen shows the maximum <br /> T 10:08:44 MAY15 concentration of current run <br /> and time/date of occurrence. <br /> 6. NEXT STEL:0.058 mg/m3 This screen shows the 15-min <br /> T 09:59:22 MAY15 STEL value of the current run <br /> and the time/date of occurrence. <br /> 7. NEXT BATTERY LEFT 83% or,if logging was enabled: <br /> BATTERY LEFT 83% This screen shows the amount <br /> MEMORY LEFT 96% of usable charge left in the <br /> battery and,if logging has <br /> been enabled, the overall amount of <br /> free memory left. <br /> 8. NEXT ANALOG OUTPUT: This screen shows the status of the <br /> 0 - 0.400 mg/m3 analog signal output, and the range, <br /> if this output has been enabled. <br /> 9. NEXT CONC*0.047 mg/m3 The last NEXT command returns <br /> TWA 0.039 mg/m3 the display to the concentration <br /> screen. <br /> 10. EXIT TERMINATE RUN? As indicated in step 2,to end <br /> Y:ENTER N:NEXT current run,key ENTER, to <br /> return to the Ready Mode: <br /> 11. ENTER START RUN: ENTER This keystroke terminates the <br /> READY: NEXT current run and returns the <br /> unit to the Ready Mode. <br /> If during a run the instrument memory is filled completely, or if all 99 tags have been <br /> used, the run is automatically terminated and the display will indicate: <br /> RUN TERMINATED <br /> FULL MEMORY <br /> If a new run is initiated after the memory has been filled, the personalDataRAM can be <br /> operated only as a monitor without logging. The memory must then be cleared (see <br /> Section 7.3.2)first before logging can be enabled again. <br /> 21 <br />