COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

(1) It is a liquid, other than an aqueous solution containing less than 24 percent alcohol by volume and has flash point less than 6000 (1400F), ,is deter- mined by a Pensky-Martens Close Cup Tester, using the test method specified in ASTM Standard D-93-79 D-93-80 (incorporated by reference, ser 260.3.1), or a Setaflash Closed Cup Testor, using the test method specified in .ASTM Standard D-3278-78 (incorpointed by reference, see 260.11), or as dot ermined by an equivalent test method apj)Txowed by the Administrator under procedures set forth in 260.20 and 260.21. (2) It is not a liquid and ins capable under standard temperature and pressure, of causing fire through friction, absorption of moisture or spontaneous chemical changes and, when ignited, burns so vigorously and persistently that is creates a hazard. (3) It is an ignitable compressed gas as defined in 49 CFR 173.300 and as deter- mined by the test methods described in that regulation or equivalent test methods approved by the Administrator under 260.20 and 260.21. (4 ) It is an oxidizer as def inrd in 49 CFR 173.151. (b) A solid waste characterization of not listed as a Subpart D, has the Number of D001. that exhit)its: the ignitabil.i.t-y . but is hazardous �.-aste in EPA Hazardous Waste (45 FR 33119, May 19, 1980, as amended -at 46 FR 35247, July 7, 1981] For the Cal Cedar fly ash, the extinguish temE»rature of the ash was determined to be 850C and 690C for samples Bin 1 and Bin 2 respectively: The extinguish temperature is that temperature at which vapor is given off from the substance. The ash did not flash, therefore the flash point is significantly higher than these temperatures. Therefore, the fly ash would not be classified as hazardous by this characteristic.