COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

y FEE-16-2010(TUE) 16:50 P.002f004 0 is Williams Tank Lines 1477 Tillie Lewis Drive Stockton, CA 95206 On January 20, 2010, Williams Tank Dines (Williams) was determined to be a "Large Generator" of hazardous waste and required to comply with CCR 66265.192. Currently Williams operates a 1,000 gallon double wall UL 142 certified waste oil tank located west of the shop and next to the exterior wall of the shop building. The tank is securely mounted on concrete and protected by a permanent building over hang. The waste oil collection and transfer system consists of oil collection drains in the maintenance pits, pneumatic transfer lines and the 1,000 gallon double wall UL 142 certified waste oil tank. The current configuration has ridged steel piping with a hard connection to the 1,000 gallon double wall UL 142 certified waste oil tank. The collected oil products from the pit containment tanks are pneumatically transferred through a closed system and oil products are stored in the 1,000 gallon double wall UL 142 certified waste oil tank. The 1,000 gallon double wall UL 142 certified waste oil tank is evacuated, when close to full, by a DTSC registered waste oil transporter company, George W. Lowry, Inc. III • Nj ! • r a Williams proposes to remove their fixed 1,000 gallon double wall UL 142 certified waste oil tank and replace it with a portable 270 gallon IBC tote system. The 1,000 gallon double wall UL 142 certified waste oil tank will be triple rinsed and moved from its location. The 1,000 gallon double wall UL 142 certified waste oil tank will become a new oil tank for relocation to another site and will not be used for the storage and containment of hazardous oil product waste. The portable twin IBC tote waste oil system will consist of two 270 gallon IBC totes securely located on a containment IBC tank spill pallet with approximately 700 gallons of containment capacity. The IBC totes are constructed of materials that are compatible for waste oil products. The IBC totes will be installed on the spill pallet and located in the same space that the 1,000 gallon double wall UL 142 certified waste oil tank was located. The IBC totes are properly labeled, portable, visible and can be moved or replaced if needed. The connection from the pneumatic transfer system will be through a quick connect fitting at the exterior wall outlet and no permanent connection to the system will be allowed.