Laserfiche WebLink
TRANSITION SUMPS <br />DOUBLE WALL SPECIFICATION <br />Summary <br />The Double Wall Transition Sump shall provide a contained environment for piping and fittings from above <br />ground product sources to underground systems, and as an above or below ground junction and termination <br />box for both electrical and fluid piping and fittings. The Double Wall Transition Sump shall contain <br />environmentally hazardous fluids that might leak from piping terminations, fittings and flex -hoses contained <br />within the transition sump box, have full ultra -violet protection and be suitable for use in all climates and <br />conditions. The Double Wall Transition Sump shall be manufactured by Western Fiberglass, Inc. <br />System Specifications <br />The Double Wall Transition Sump shall: <br />1.01 System Suitability: <br />A. Be installed either above or below ground or partially buried to suit applications required. <br />B. Be of sufficient size to allow all piping terminations, fittings, equipment, and flex -hoses to be <br />contained within the Transition Box. <br />C. Allow ample area to provide for servicing and inspection of all piping terminations, fittings, <br />equipment and flex -hoses within the Transition Box Assembly. <br />D. Contain any release of environmental contaminates from piping and fittings enclosed within <br />the Transition Box. <br />E. Be available as a U.L. Listed device if required. <br />1.02 Construction Specifications: <br />A. Meet or exceed United States National Bureau of Standards PS -15-69 for Custom Molded <br />Reinforced -Polyester Chemical -Resistant Process Equipment or U.L. Listing if applicable. <br />B. Be constructed of materials that are not harmful to the environment. <br />C. Be non -permeable by hydro -carbons and not weakened by exposure to these materials. <br />D. Be unaffected by ultra -violet light exposure and not weakened by such exposure. <br />E. Be suitable for petroleum products and blends. <br />F Have a thirty (30) year warranty (Excluding Gaskets). <br />1.03 Release Monitoring shall: <br />A. Allow full visual and physical access/inspection of all piping fittings and equipment. <br />B. Provide a monitor point for an electronic probe and/or evacuation of fluids. <br />• • • <br />1555 Copperhill Parkway• • " • • CA 954MI, <br />:11 .: or 1 523-2050 <br />www.westernfg.com <br />