Laserfiche WebLink
19255517888 Main Fax GETTLER RYAN INC 04:42:10 p.m. 11-30-2007 3/4 <br /> D. Results of Testing/Servicing <br /> Software version Installed: <br /> Com lets the follo ing checklist: <br /> =.._ — — <br /> Yes ❑ No Is the visual alarm operational? <br /> Yes ❑ No* Were all sensors visually inspected.functionally tested,and confirmed operational'? <br /> Yes ❑ Nu" Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> ❑ Yes ❑ No'` If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br /> ba N/A operational? <br /> Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> N/A monitoring system detects a leak, fails to operate,or is electrically disconnected'? If yes: which sensors initiate <br /> positive shut-down? (Check till that apply) ❑Sump/Trench Sensors; ❑Dispenser Containment Sensors. <br /> Did you confirm p2sitive shut-down due to leaks and sensor failure/disconnection? ❑ Yes; 0 No. <br /> yr Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br /> ❑ N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> tillpoint(s)and operating ro erl ? If so,at what eercent of tank capacity does the alarm tri eL? Flo <br /> Yes* ❑ No Was any monitoring equipment replaced? If yes, identify specific sensors, probes,or other equipment replaced <br /> and list the manufacturer name and model for all re lacement parts in Section E,below. <br /> ® Yes* No Was liquid found inside any secondary containment systems designed as dry systems? (Cheek all that apply)❑ <br /> Product, ❑ Water. If Xes,describe causes in Section E,below. <br /> Yes ❑ No* Was monitoring system-set-up reviewed toensure proper settings?Attach set up reports,if a22licable <br /> Yes ❑ Nos *Is all monitoring equipment oerational per manufacturer's specifications? <br /> -*In Section E below,describe how and when these deficiencies were or will be corrected. 22 2 <br /> E. Comments: <br /> Page 2 of 3 o►.3/nt <br />