Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 8. PIPING SUMP TESTING <br /> am= ED <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professio al <br /> 11 Other(Spec) PAPP 11 20 4 <br /> Test Method Used: ❑Pressure 1],Vacuum X Hydrostatic <br /> 11Other(Sped) <br /> Test Equipment Used:Caldwell Level Change Indicator Equipment Resolution: *34 ENK <br /> Sump#5-Vapor Pot Sump# Sump# Sump# <br /> Sump Diameter: 47"x 35"box <br /> Sump Depth: 48" <br /> Sump Material: Fiberglass <br /> Height from Tank Top to Top of 26„ <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 27„ <br /> Electrical Penetration: <br /> Condition of sump prior to testing: Dry <br /> Portion of Sump Tested' Water Level 29" <br /> Does turbine shut down when <br /> sump sensor detects liquid(both Yes <br /> product and water)?' <br /> Turbine shutdown response time Not Alarmed <br /> Is system programmed for fail-safe Yes <br /> shutdown?" <br /> Was fail-safe verified to be No <br /> operational?* <br /> Wait time between applying water 5 Minutes <br /> and starting test: <br /> Test Start Time: 10:45 <br /> Initial Reading(Ri): .001 <br /> Test End Time: 11:15 <br /> Final Reading(RF): .001 <br /> Test Duration: 30 Minutes <br /> Change in Reading(RF-R,): 0 <br /> Pass/Fail Threshold or Criteria: .005/30 Minutes <br /> Test Result: Pass <br /> Was sensor removed for testing? Yes <br /> Was sensor properly replaced and Yes <br /> verified functional after testin ? <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to as of the questions indicated with an <br /> asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160) <br />