COMPLIANCE INFO_2004-2007 - Laserfiche WebLink

Home Browse Search

UCSB04N — SS#2705448 8. Page 6 of 7 FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Other (Spec) ® Industry ❑ Professional Engineer Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ Vacuum ® Hydrostatic Test Equipment Used: INCON TS-STS TEST UNIT Fill Sump # 87 Fill Sump # 89 Equipment Resolution: Fill Sump # 91 Fill Sump # Sump Diameter: NA NA NA Sump Depth: NA NA NA Height from Tank Top to Top of Highest Piping Penetration: NA NA NA Height from Tank Top to Lowest Electrical Penetration: NA NA NA Condition of sump prior to testing: NA NA NA Portion of Sump Tested NA NA NA Sump Material: NA NA NA Wait time between applying pressure/vacuum/water and starting test: NA NA NA Test Start Time: NA NA NA NA NA NA Initial Reading (RI): NA NA NA NA NA NA Test End Time: NA NA NA NA NA NA Final Reading (RF): NA NA NA NA NA NA Test Duration: NA NA NA NA NA NA Change in Reading (RF-RI): NA NA NA NA NA NA Pass/Fail Threshold or Criteria: NA NA NA NA NA NA Test Result: ❑ Pass❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass' ❑, Fail Is there a sensor in the sump? p Yes ® No ❑ Yes ® No ❑ Yes ® No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA Was sensor removed for testing? ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? 11Yes ElNo ® NA ElYes ElNo ® NA ElYes [INo ® NA ❑ Yes ❑ No ElNA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) FACILITY IS NOT EQUIPPED WITH FILL RISER SUMPS. NO TESTING REQUIRED.