COMPLIANCE INFO_2008-2011 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page_4_of—7- 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑Professional Engineer ❑ Other(Spec) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other(Spec) Test Equipment Used: INCON SUMP TESTER Equipment Resolution: +/-0.002" Sump#87 Sump#91 Sump#DIESEL Sump# Sump Diameter: 48" 48" 48" Sump Depth: 59.50" 59.00" 60.00" Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of 11.50" 9.50" 9.50" Highest Piping Penetration: Height from Tank Top to Lowest 9.50" 9.00" 10.00" Electrical Penetration: Condition of sump prior to testing: DRY DRY DRY Portion of Sump Tested' ABOVE ABOVE ABOVE PENETRATION PENETRATION PENETRATION Does turbine shut down when sump sensor detects liquid(both ®Yes ❑No ❑NA ®Yes []No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?' Turbine shutdown response time 3 SEC 3 SEC 3 SEC Is system programmed for fail-safe ®Yes ❑No [-INA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown?* Was fail-safe verified to be operational?* fail-safe ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA Wait time between applying pressure/vacuum/water and starting 10 MIN 10 MIN 10 MIN test: Test Start Time: 9:15 AM 9:15 AM 9:15 AM Initial Reading(RI): 5.5058" 6.0560" 4.3081" Test End Time: 9:30 AM 9:30 AM 9:30 AM Final Reading(RF): 5.5057' 6.0560" 4.3078" Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-RI): -0.0001" 0.000" -0.0003" Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" +/-0.002" Test Result: Z Pass ❑Fail Z Pass ❑Fail Z Pass ❑Fail []Q Pass ❑Fail Was sensor removed for testing? ®Yes ❑No ❑NA ®Yes ❑No ❑NA ®Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testin ? ®Yes [:]No ❑NA ®Yes ❑No [:1 NA ®Yes [I No [__1 NA ❑Yes [:]No ❑NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) ABOVE IS THE LAST OF TWO BACK TO BACK 15 MINUTE TESTS 1 If the entire depth of the sump is not tested,specify how much was tested. If the answer to qny of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)