COMPLIANCE INFO_2002-2015 - Laserfiche WebLink

Home Browse Search

JP Petroleum Service 0 SWRCB, January 2002 9163724873 P.6 Page _ of Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Spec) Test Equipment Used: Caldwell Systems Equipment Resolution:.005/30 min UDC # 1&2 UDC # 3&4 UDC # 5&6 UDC # 7&8 UDC Manufacturer: Western Western Western Western UDC Material: Fiber lass Fiber lass Fiberglass Fiberglass UDC Depth: 24" 24" 24" 24" Height from UDC Bottom to Top 11" of Highest PipjqE Penetration: 11" 10" 10" Height from UDC Bottom to 7" Lowest Electrical Penetration: 7" 7" 7" Condition of UDC prior to Dry testing: Dry Dry Dry Portion of UDC Tested 2" above Highest PipLn& penetration Does turbine shut down when UDC sensor detects liquid (both x Yes ❑ No ❑ NA rc duct and water)?` x Yes ❑ No [INA x Yes ❑ No ❑ NA x Yes ❑ No ❑ NA Turbine shutdown response time Is system programmed for fail- safe shutdown? x Yes ❑ No ❑ NA x Yes ❑ No ❑ NA x Yes ❑ No ❑ NA x Yes ❑ No ❑ NA Was fail-safe verified to be ❑ yes x No ❑ NA o rational?' ❑ Yes x No ❑ NA ❑ Yes x No ❑ NA ❑ Yes x No [INA Wait time between applying pressure/vacuum/water and 5 min starting test 5 min 5 min 5 min Test Start Time: I2:20 12:30 12:10 10:40 Initial Readm (RI): .00" .00" .00" .00" Test End Time: 12:50 1:00 12:40 11:10 Final Reading (RF): .00 .00 .00 .0025 Test Duration: 30 min 30 min 30 min 30 min Change in Reading (RF -RI): .00 .00 .00 .0025 Pass/Fail Threshold or Criteria: .005/30 min .005/30 min .005/30 min .005/30 min Test Result: x Pass ❑ Fail x Pass ❑ Fail x Pass ❑ Fail x Pass ❑ Fail Was sensor removed for testing? x Yes ❑ No Q NA x Yes O No ❑ NA x Yes ❑ No ❑ NA x Yes ❑ No ❑ NA Was sensor properly replaced and I x Yes ❑ No ❑ NA verified functional after testing? x Yes ❑ No ❑ NAx Yes ❑ No ❑ NA x Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing; and recommended follow-up for failed tests) 1 If the entire depth of the UDC is not tested, specify how much was tested. If the answer to My of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)