Laserfiche WebLink
16 <br />17. <br />Tanks subject to floatatio [Section 2635 (a) (7)] i <br />A. Anchored by deadman or slab. <br />B. Anchors to be installed as specified by manufacturer. <br />C. Installation details provided on plans. <br />D. Calculations provided. <br />SPILLLL AND OVERFILL PREVENTION <br />✓ Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br />container(s)/piping sump(s) required, including tank fill and all openings). <br />A. / Spill container [Section 2635 (b) (1)]. <br />4/ If made of metal, exterior wall protected from galvanic corrosion. <br />✓ Capacity: (minimum of five gallons) <br />Equipped with a drain valve which allows drainage of spill into primary container. <br />Manufacturer: . (OG> 00 <br />B. Overfill prevention system does not allow for manual override and meets one of the following requirements: <br />(1) Alert transfer operator at 90% full by restricting the flow into the tank or triggering an audible <br />and visual alarm [Section 2635(b)(2)(A)l . <br />Manufacturer: Model: <br />_ (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than <br />95% capacity and activates an audible alarm at least five minutes before overfill [Section 2635 <br />(b) (2) (8)). <br />Manufacturer: Model: <br />(3) Provide positive shut off at no more than 95% capacity [Section 2635 rr(b) (2) (C)]. <br />Manufacturer: Model: t4 —1 fpr oGT• <br />(4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not <br />exposed to the product overfilling [Section 2635 (b) (2) (D)]. <br />Manufacturer: Model: <br />18. PIPING INFORMATION <br />PIPING INFORMATION <br />TANK# ( <br />TANK# <br />TANK# <br />TANK# <br />DISTANCE from <br />DISPENSER to TANK <br />7o <br />MANUFACTURER <br />SYSTEM TYPE * <br />Q g <br />CONSTRUCTION ** <br />�- <br />E <br />MATERIAL *** <br />p <br />LEAK DETECTION SYSTEM <br />- 61 <br />L 1v <br />100% METHANOL COMPATIBILITY <br />%� YES <br />NO <br />CORROSION PROTECTION <br />YES <br />NO <br />* System Type; suction, pressure, and gravity <br />** Construction: single -walled, double -walled, lined -trench, etc. <br />*** Material Type; steel with cathodic protection, stainless-steel, fiberglass reinforced plastic. <br />