Laserfiche WebLink
San Joaquin County DIRECTOR <br /> Donna Heran, REHS <br /> O.PQ'U!N' •C Environmental Health Department ASSISTANT DIRECTOR <br /> 600 East Main Street Laurie Cotulla, REHS <br /> •. � �z� <br /> Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> • Carl Borgman,REHS <br /> Mike Huggins,REHS, RDI <br /> oq �P Website: www.sjgov.org/ehd Margaret Lagorio, REHS <br /> �iFOR Phone: (209) 468-3420 Robert McClellon,REHS <br /> Fax: (209)464-0138 .teff Carruesco, REHS, RDI <br /> Kasey Foley, REHS <br /> December 4, 2007 <br /> Nikki Middleton <br /> BZ Service Station Maintenance <br /> Fax: 916-371-2540 <br /> RE: 1225 W Lockeford Street, Lodi (SR0052739) <br /> The San Joaquin County Environmental Health Department (EHD) has completed the <br /> review of the application for permit(SR0052739)to install an OPW 1 C-2100 direct <br /> burial spill bucket on the diesel fill riser and an OPW IDK-2100-EVR drain valve kit on <br /> the 91 product fill spill bucket at the above noted address. <br /> The permit also includes two parts installed on 11-20-07. Installation and testing of these <br /> parts were witnessed by an EHD inspector at that time. The parts were a FE Petro 91 <br /> product turbine relay and a VMI 99 LD2000 line leak detector. The permit has been <br /> approved with the following conditions: <br /> I. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board(may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s) of the <br /> component(s) being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 3. Permit expires 90 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> 4. All components must be certified by an independent testing organization and <br /> d as re uired by the organization. (UL, ULC, ANSI, API, ASTM, etc. See <br /> PR <br /> EX1 , s... Page 1 of 2 <br />