COMPLIANCE INFO_1997-2006 - Laserfiche WebLink

Home Browse Search

v D.Results of Testing/Servicing 0 Software Version Installed: Complete the following checklist: t."I Yes ❑ No* Is the audible alarm operational? ox Yes No* Is the Visual alarm operational? x Yes No* Were all sensors visually inspected,functionally tested,and confirmed operational? x Yes ❑ No* Were all sensors installed at the lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? Yes No* If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem) HxN/A operational? x Yes ❑ No* For pressurized piping systems,does the turbine automatically shut down if the piping secondary ❑N/A containment monitoring system detects a leak,fails to operate,or is electrically disconnected?If yes: which sensors irritate positive shut-down? [�O Sump/Trench Sensors[x]Dispenser Containment Sensors Did you confirm positive shut-down due to leaks and sensor failure/disconnected? [x] Yes; ❑ No; [X] Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device(i.e.no ❑N/A mechanical overfill prevention valve is installed),is the overfill warning alarm visual and audible at the tank fill point(s)and operating properly?If so,at what percent of tank capasity does the alarm trigger? � % Yes* U No Was any monitoring equipment replaced?If Yes,identify specific sensors,probes,or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E,below. ❑ Yes* ❑ No Was liquid found inside any secondary containment systems designed as dry systems? ❑Product; ❑ Water.If yes,describe causes in Section E,below. xNo* Was monitoring system set-up reviewed to ensure proper settings?Attach set-up reports,if applicable. x Yes No* Is all monitoring equipment operational per manufacturer's specifications? *In Section E below,discribe how and when these deficiencies were or will be corrected. E. Comments: