Laserfiche WebLink
ec(?J <br /> Page 6 of 8 eca-c�E._Comft cc <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑vacuum ❑Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and0 <br /> starting test: W !NN' <br /> Test Start Time: ` <br /> Initial Reading(R,): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-RI): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: ElPass ❑Fail E] Pass ElFail ❑ Pass ❑Fail E] Pass ❑Fail <br /> Is there a sensor in the sump? ❑Yes ❑No ❑Yes [:]No []Yes ❑No ❑Yes [-]No <br /> Does the sensor alarm when <br /> either product or water is [-]Yes❑No[:INA ❑Yes❑No❑NA ❑Yes[:]No❑NA ❑Yes[:]No[:INA <br /> detected? <br /> Was sensor removed for testing? ❑Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA <br /> Was sensor properly replaced and <br /> verified functional after testing? ❑Yes❑No❑NA ❑Yes[:]No[:INA ❑Yes[:]No[-INA ❑Yes[:]No[-INA <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />