Laserfiche WebLink
Jul 26 06 08:35p Mike Dotten <br />Facility Name: Mossdale <br />D. Results of Testing/Servicing <br />Software Version installed: Forgot to look. <br />ComDlete the following eherkhst- <br />209-533-2650 p.2 <br />(Page 2) <br />® Yes <br />❑ No* <br />Is the audible alarm operational? <br />® Yes <br />❑ No* <br />Is the visual alarm o rational? <br />® Yes <br />❑ No* <br />Is the int function o erational? Not installed. <br />® Yes <br />❑ No* <br />Were all sensors visual] ted, functional testi and confirmed o eradonal? <br />® Yes <br />❑ No* <br />Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will <br />not interfere with their proper o eration7 <br />❑ Yes <br />❑ No* <br />If alarms are relayed to a remote monitoring stat ion, is all communications equipment (e.g, modem) <br />® N/A <br />operational? <br />® Yes <br />❑ No* <br />For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br />❑ N/A <br />monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate <br />positive shut -down? (Check all that apply) 0 Sump/Trench Sensors; ® Dispenser Containment Sensors. <br />Did you confirm positive shut -down due to leaks and sensor failure/disconnection? ®Yes, ❑ No. <br />❑ Yes <br />❑ No* <br />N/A <br />For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. no <br />mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br />❑ Yes* <br />® No <br />fill int s and operating ro rl ? If so, at what percent of tank ea achy does the alarm trigger? <br />Was <br />any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced <br />and list the manufacturer name and model for all replacement parts in Section E, below. <br />❑ Yes* <br />® No <br />Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply) <br />❑ Product; ❑ Water. If <br />yes, describe causes in Section E, below. <br />® Yes <br />19 Yes <br />❑ No* <br />❑ No* <br />Was monitorin s stem set -u reviewed to ensure proper settin s? Attach set re , if licable <br />Is <br />all monitoring equipment oerational per manufacturer's specifications? <br />_�. va.c Rvu L UWLU*V, Uesel-lue now and when these deficiencies were or will be corrected. <br />E. COMMCnts: Each fill -spill bucket was tested with water for thirty minutes and were all found to be tight. At the end of <br />the test the water was emptied into a hazardous waste barrel. We had to remove dispenser filters into another solid waste <br />barrel to make room for the water. <br />