COMPLIANCE INFO_1999-2010 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer x Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum x Hydrostatic ❑Other(Sped) Test Equipment Used: Inco st tst Equipment Resolution: .002" Sump#1 Sump# Sump# Sump# Sump Diameter: 48" Sump Depth: 31" Sump Material: Fiberglass Height from Tank Top to Top of 2219 Highest Piping Penetration: Height from Tank Top to Lowest 18" Electrical Penetration: Condition of sump prior to testing: Good Portion of Sump Tested' 2"above pipe Does turbine shut down when sump sensor detects liquid(both x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?` Turbine shutdown response time Is system programmed for fail-safe x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown? Was fail-safe verified to be o erational?` x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Wait time between applying pressure/vacuum/water and starting 30 min test: Test Start Time: 12:02 12:18 Initial Reading(RI): 7.4805" 7.4807" Test End Time: 12:18 12:34 Final Reading(RF): 7.4808" 7.4797" Test Duration: 15 min 2 x Change in Reading(RF-R,): .0003" .0010" Pass/Fail Threshold or Criteria: .002" Test#esIt: x Pass ❑Fail ❑ Pass O Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and x Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to Any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)