COMPLIANCE INFO_2002-2010 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer C Industry Standard ❑Professional Engineer 0 Other(Spec) Test Method Used: ❑Pressure ❑Vacuum 0 Hydrostatic ❑Other(Spec) Test Equipment Used:TS STS Equipment Resolution: .000 Sump#87 Sump#91 Sump#DSL Sump# Sump Diameter: 42 42 42 Sump Depth: 58 58 58 Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of 14 14 14 Hi hest Pi in Penetration: Height from Tank Top to Lowest 14 14 l4 Electrical Penetration: Condition of sump prior to testing: GOOD GOOD GOOD Portion of Sump Tested' 16 16 16 Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ❑NA 0 Yes ❑No DNA 0 Yes ❑No 0 NA C Yes ❑No 0 NA product and water)?* Turbine shutdown response time Is system programmed for fail-safe 0 Yes 0 No ❑NA ❑Yes ❑No C NA ❑Yes 0 No ❑NA ❑Yes ❑No CNA shutdown?' Was fail-safe verified to be ❑Yes 0 No 0 NA 0 Yes ❑No ❑NA 0 Yes ❑No 0 NA ❑Yes C No ❑NA o erational?` Wait time between applying pressure/vacuum/water and starting test: Test Start Time: 1059 1133 1017 Initial Reading(RI): 2.9560 4.0593 4.0944 Test End Time: 1114 1148 1033 Final Reading(RF): 2.9555 4.0558 4.0948 Test Duration: 15 MIN 15 MIN 15 MIN Change in Reading(RF-RI): 1 0.0005 0.0035 0.0004 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 Test Result: YPass ❑Fail ❑ Pass 2rFail Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? XYes ❑No C NA VVes 0 No ❑NA //Yes ❑No ❑NA 0 Yes 11 No El NA Was sensor properly replaced and 5(Yes ❑No ❑NA (a"Yes ❑No ❑NA _Kes ❑No ❑NA ❑Yes ❑No CNA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to gfly of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)