COMPLIANCE INFO_2002-2010 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of 7. UNDER-DISPENSER CONTAINMENT C TESTING Test Method Developed By: ❑UDC Manufacturer ZTndustry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: ❑Pressure ❑Vacuum 0"Hydrostatic ❑Other(Spec) Test Equipment Used:TS STS Equipment Resolution:0.0001" UDC#1-2 UDC#3-4 UDC# UDC# UDC Manufacturer: BRAVO BRAVO UDC Material: STEEL STEEL UDC Depth: 10 10 Height from UDC Bottom to Top 0 0 of Highest Piping Penetration: Height from UDC Bottom to 0 0 Lowest Electrical Penetration: Condition of UDC prior to GOOD GOOD testing: Portion of UDC Tested 3" 3" Does turbine shut down when UDC sensor detects liquid(both !]Yes ❑No [INA ❑Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No [INA product and water)?* Turbine shutdown response time is system programmed for fail- ❑yes ❑No ❑NA Yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA safe shutdown?* Was fail-safe verified to be ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting test Test Start Time: 1459 1544 Initial Reading(Ri): 0.0623 0.0598 Test End Time: 1514 1559 Final Reading(RF): 0.0391 -0.0035 Test Duration: 15 MIN 15 MIN Change in Reading(RF-Ri): 0.0232 0.0633 Pass/Fail Threshold or Criteria: 0.002 0.002 Test Result: ❑ Pass ('Fail ❑ Pass ?fail ❑ Pass []Fail ❑ Pass ❑Fail Was sensor removed for testing? ❑Yes ❑No E?NA ❑Yes ❑No CNA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and ❑yes ❑No verified functional after testing? CRNA ❑Yes ❑No CLIA ❑Yes ❑No [INA ❑Yes ❑No ❑NA Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) 'If the entire depth of the UDC is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)