COMPLIANCE INFO_2002-2010 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page_of 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer 01ndustry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum Aydrostatic ❑Other(Spec) Test Equipment Used:TS STS Equipment Resolution:.0001" Sump#87 Sump# Sump# Sump# Sump Diameter: 42 Sump Depth: 58 Sump Material: FIBERGLASS Height from Tank Top to Top of 14 Highest Piping Penetration: Height from Tank Top to Lowest 14 Electrical Penetration: Condition of sump prior to testing: GOOD Portion of Sump Tested' 16 Does turbine shut down when sump sensor detects liquid(both ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?' Turbine shutdown response time Is system programmed for fail-safe ❑yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA shutdown?* Was fail-safe verified to be ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying pressure/vacuum/water and starting test: Test Start Time: 1439 Initial Reading(Rj): 3.3556 Test End Time: 1455 Final Reading(RF): 3.3566 Test Duration: 15 MIN Change in Reading(RF-RI): 0.001 Pass/Fail Threshold or Criteria: 0.002 Test Result: B'Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? Z Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No ❑NA Was sensor properly replaced and Dl'es ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA verified functional after testing? Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to ggy of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)