COMPLIANCE INFO_FILE 3 - Laserfiche WebLink

Home Browse Search

UCRL-AR-103194 standby emergency generator to Bldg 882,occupied by LLNL's Protective Services Division. The steel tank with fiberglass-clad exterior,made by Modern Welding, has a 1500-gallon capacity. The tank is double-walled,consisting of a smaller,primary tank that contains the product(in this case,diesel fuel) nested inside a larger,encasing secondary tank. The space enclosed between the two tank walls is the tank's annular space. The piping is also considered a part of the tank system. Like the tank, the piping is double-walled, the primary piping being surrounded by secondary piping. The secondary piping is connected to a piping containment sump. Monitoring Procedure The monitoring procedure is a continuous electronic monitoring procedure. The electronic monitoring equipment is tested and maintained through weekly and annual checks. Electronic Monitoring of Tank System The tank is electronically monitored at all times with a Universal Leak Alert Hazardous-Substance Sensor(Alarm Panel Model LA-02,Liquid Probe Model LALS-1). The liquid probe is installed in the tank's annular space and connected with electrical conduit to the sensor's audio-visual alarm panel. If there is a leak in the primary tank wall,the product will drain into the secondary tank. When the product covers the sensor's liquid-sensitive probe, the alarm will activate. The alarm panel for the liquid probe is mounted on the west wall of Bldg 882 (Fig. 1). The tank's piping also is electronically monitored at all times,in this case with a Universal Leak Alert Hazardous-Substance Sensor(Alarm Panel Model LA-02,Liquid Probe Model LALS-1). The liquid sensor is placed in the piping-containment sump above the tank and connected with electrical conduit to the sensor's audio-visual alarm panel. If there is a leak in the primary piping wall, the product will drain into the secondary piping. From the secondary piping, the product will drain into a piping-containment sump. When the product covers the sensor's liquid-sensitive probe in the sump,the alarm will activate. The alarm panel for the liquid sensor is mounted on the west wall of Bldg 882 (Fig. 1). If the Operator has any questions or concerns about the monitoring probe,he can contact the manufacturer,Universal Sensors and Devices, Inc., at(800)-899-7121 or Leak Alert Service Co., at(800)-464-4405. Equipment Maintenance In response to a request by San Joaquin County Public Health Services, the following electronic monitoring equipment is checked each week: • Green power light. • Red tank alarm light. 2 Monitoring Program for New Underground Storage Tank