Laserfiche WebLink
• <br />• <br />SWRCB, January 2002 Page _3_ of_8_ <br />5_ SPCONDARV PIPE TESTING <br />Test Method Developed By: <br />❑ Piping Manufacturer ® Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: <br />® Pressure <br />❑ Other (Spec) <br />❑ Vacuum <br />❑ Hydrostatic <br />Test Equipment Used: 0 —15 PSI GAUGES <br />Piping Run # DIESEL <br />r <br />Piping Material: FIRBERLGASS <br />Piping Run # 87 <br />FIBERGLASS <br />Equipment Resolution <br />Piping Run # 91 <br />.5% <br />Piping Run # WASTE <br />OIL <br />FIBERGLASS <br />FIBERGLASS <br />Piping Manufacturer: <br />AMERON <br />AMERON <br />AMERON <br />AMERON <br />Piping Diameter: <br />2" X 3" <br />2" X 3" <br />2" X 3" <br />2" X 3" <br />Length of Piping Run: <br />175' <br />175' <br />175' <br />35' <br />Product Stored: <br />DIESEL <br />87 <br />91 <br />WASTE OIL <br />Method and location of <br />piping -run isolation: <br />TEST BOOT / <br />STP SUMP <br />TEST BOOT / <br />STP SUMP <br />TEST BOOT / <br />STP SUMP <br />TEST BOOT / <br />STP SUMP <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />10 MIN <br />10 MIN <br />10 MIN <br />10 MIN <br />Test Start Time: <br />8:30 <br />9:00 <br />10:30 <br />3:15 <br />Initial Reading (Rj): <br />5.0 PSI <br />5.0 PSI <br />5.0 PSI <br />5.0 PSI <br />Test End Time: <br />9:30 <br />10:00 <br />11:30 <br />4:15 <br />Final Reading (RF): <br />5.0 PSI <br />5.0 PSI <br />5.0 PSI <br />5.0 PSI <br />Test Duration: <br />1 HR <br />1 HR <br />1 HR <br />1 HR <br />Change in Reading (RF-Ri): <br />0 <br />0 <br />0 <br />0 <br />Pass/Fail Threshold or <br />Criteria: <br />NO LOSS <br />NO LOSS <br />NO LOSS <br />NO LOSS <br />Test Result: <br />® Pass ❑ Fail <br />❑ Pass ❑ Fail <br />® Pass ❑ Fail <br />® Pass ❑ Fail <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />REPLACED TEST BOOTS ON 91 PRODUCT SECONDARY <br />