COMPLIANCE INFO_2013-2017 - Laserfiche WebLink

Home Browse Search

E SWRCB, January 2002 Page _6_ of —8- 8. FILL RISER CONTAINMENT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Specie) Test Equipment Used: INCON SUMP TESTER Equipment xesoiution: + i - u.uuz-- Sump Diameter: Fill Sump # Fill Sump # Fill Sump # Fill Sump # Sump Depth: Height from Tank Top to Top of Highest Piping Penetration: Height from Tank Top to Lowest Electrical Penetration: Condition of sump prior to testing: Portion of Sump Tested Sump Material: Wait time between applying pressure/vacuum/water and starting test: Test Start Time: Initial Reading (R,): Test End Time: Final Reading (RF): Test Duration: Change in Reading (RF -R,): Pass/Fail Threshold or Criteria: +/-0.002" + / - 0.002" + t - 0.002" + / - 0.002" Test Result: ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fait [] Pass ❑ Fail Is there a sensor in the sump? ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ❑ Yes [:]No ❑ NA ❑ Yes ❑ No ❑ NA []Yes ❑ No ❑ NA []Yes ❑No ❑ NA Was sensor removed for testin ? ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No [INA ❑ Yes ❑ No [INA ❑ Yes ❑ No [INA Was sensor properly replaced and verified functional after testing? ❑Yes ❑ No ❑ NA [:]Yes❑ No ❑ NA El Yes ElNo ❑ NA []Yes E3No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) DIRECT BURY FILL RISERS