Laserfiche WebLink
Page 7 of 9 <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ®Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: See attached testing procedures Equipment Resolution: <br /> Fill Sump#87-1 Fill Sump#87-2 Fill Sump#91 Fill Sump# <br /> Sump Diameter: 48" 48" 48" <br /> Sump Depth: 82" 83" 81" <br /> Height from Tank Top to Top of 12" 12" 12" <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest 23" 24" 23" <br /> Electrical Penetration: <br /> Condition of sump prior to Fair Fair Fair <br /> testing: <br /> Portion of Sump Tested Above highest Above highest Above highest Above highest <br /> penetration penetration penetration penetration <br /> Sump Material&Manufacturer: Fiberglass Fiberglass Fiberglass <br /> Wait time between applying <br /> pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes <br /> starting test: <br /> Test Start Time: 10:35am Visual Fail Visual Fail <br /> Initial Reading(R,): 1.9151 <br /> Test End Time: 10:50am <br /> Final Reading(RF): 1.9157 <br /> Test Duration: 15 min <br /> Change in Reading(RF-R,): 0.00061 <br /> Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 <br /> gilt* xR, a" Mal „ <br /> ,s <br /> Is there a sensor in the sump? ®Yes ❑No ®Yes ❑No ®Yes ❑No E Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is ❑Yes [-]No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA ❑Yes❑No ®NA <br /> detected? <br /> Was sensor removed for testing? ®Yes ❑No r-1 ®Yes E]No ❑ <br /> ®Yes ❑No ❑NA ®Yes ❑No[:]NA ®Yes <br /> NA <br /> Was sensor properly replaced and ❑NA ®Yes <br /> verified functional after testing? ®Yes ❑No ❑No❑NA ®Yes El No[-]NA ®Yes [:]No❑NA <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> 87-2 Fill Sump—water level dropped 3" in 15 minutes <br /> 91 Fill Sump—water level dropped 8" in 15 minutes <br />