Laserfiche WebLink
Page 8 of 9 <br /> 9. SPILL/OVERFILL CONTAINMENT BOXES <br /> Facility is Not Equipped With Spill/Overfill Containment Boxes ❑ <br /> Spill/Overfill Containment Boxes are Present,but were Not Tested ❑ <br /> Test Method Developed By: ❑ Spill Bucket Manufacturer ®Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure ❑Vacuum ®Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: See attached testing procedures Equipment Resolution: <br /> Spill Box#87-1 fill Spill Box#87-2 fill Spill Box#91 fill Spill Box# <br /> Bucket Diameter&Brand: 12"Philtite 12"Philtite 12"Philtite <br /> Bucket Depth: 12.5" 14" 13.5" <br /> Wait time between applying <br /> pressure/vacuum/water and 30 Minutes 30 Minutes 30 Minutes <br /> starting test: <br /> Test Start Time: 11:24am 10:35am 10:35am <br /> Initial Reading(Ri): 1.7008 1.2760 1.2595 <br /> Test End Time: 11:39am 10:50am 10:50am <br /> Final Reading(RF): 1.7002 1.2759 1.25% <br /> Test Duration: 15 minutes 15 minutes 15 minutes <br /> Change in Reading(RF-RI): 0.00054 0.00011 0.00010 <br /> Pass/Fail Threshold or 0.002 0.002 0.002 0.002 <br /> Criteria: <br /> �g <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> 87-1 Fill Bucket—replaced drain valve, lower and upper O'Rings <br />