COMPLIANCE INFO_2010 - Laserfiche WebLink

Home Browse Search

6T6T6M5 CE Page 4 of 8 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer O Industry Standard ❑Professional Engineer ❑ Other(Specify) Test Method Used: ❑Pressure ❑Vacuum ® Hydrostatic ❑Other(Specify) Test Equipment Used: Caldwell Equipment Resolution: 00 SU 6 sump sump sump Sump Diameter: 42" Sump Depth: 59" Sump Material: Fiberglass Height from Tank Top to Top of 28„ Highest Piping Penetration: Height from Tank Top to Lowest 8„ Electrical Penetration: Condition of sump prior to testing: Dry Portion of Sump Tested' 2" above product Does turbine shut down when sump sensor detects liquid(both product and ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑Yes ❑ No ® NA ❑ Yes ❑ No ® NA water)T Turbine shutdown response time -------------- See Comments -------------- Is system programmed for fail-safe ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑Yes ❑ No N NA ❑Yes ❑ No ® NA shutdownT Was fail-safe verified to be ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No N NA o erationalT Wait time between applying pressure/vacuum/water and starting 5 min test: Test Start Time: 09:50 AM Initial Reading(Ri): 0.0025 Test End Time: 10:20 AM_ Final Reading(RF): 0.0025 Test Duration: 30 min Change in Reading(RF-Ri): 0 Pass/Fail Threshold or Criteria: 1/16" hr Test Result: 0 Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass O Fail Was sensor removed for testing? ®Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced after ®Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA testin ? Comments (include information on repairs made prior to testing and recommended follow-up for failed tests) Turbine shutdown done during Annual Monitor Certification. If the entire depth of the sump is not tested,specify how much was tested. If the answer to M of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB 1,G-160)