Laserfiche WebLink
Elite IV Contractors <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sums ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested X <br /> Test Method Developed By: 0 Sump Manufacturer Cl Industry Standard ❑Professional Engineer <br /> ❑Other(Specie) <br /> Test Method Used: O Pressure 0 Vacuum X Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: Caldwell Tester Equipment Resolution: <br /> Fill Sump# 87 Fill Sump# 91 Fill Sump# Die Fill Sump# <br /> Sump Diameter: 38" 38" 38" <br /> Sump Depth: 7'6" 7'6" 7'6" <br /> Height from Tank Top to Top of N/A N/A N/A <br /> Highest Pi in Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> pressure/vacuum/water and <br /> starting test: <br /> Test Start Time: <br /> Initial Reading(R,): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration- <br /> Change <br /> uration:Chan a in Reading(RF-R,): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: D Pass D Fail D Pass ❑Fail 0 Pass D Fail 0 Pass 0 Fail <br /> Is there a sensor in the sump? 0 Yes ❑No 0 Yes ❑No ❑Yes ❑No ❑Yes ❑No <br /> Does the sensor alarm when <br /> either product or water is ❑Yes ❑No D NA D Yes 0 No 0 NA ❑Yes D No DNA ❑Yes D No ❑NA <br /> detected? <br /> Was sensor removed for testing? ❑Yes 0 No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA 11 Yes 0 No Ll NA <br /> Was sensor property replaced and ❑Yes 1-1No ❑NA ❑Yes ❑No ONA ❑Yes 0 N El NA ❑Yes 0 N DNA <br /> verified functional after testing? <br /> Comments— (include information on repairs made prior to testing, and recommended follot+,-up for,failed tests) <br /> ENTAL HEALMI'- <br />