Laserfiche WebLink
Bulletin No.B2107 <br /> October 1,1993 <br /> * GENERAL SPECIFICATIONS <br /> UL Listed RED THREADO IIA Piping <br /> SCOPE 2"-4" FITTINGS - Compression.molded fittings <br /> shall be manufactured using an epoxy mold- <br /> PIPE -Pipe shall be manufactured by Smith ing compound. The molding compound shall <br /> Fiberglass Products Inc. by a filament winding be reinforced with a minimum of 45% <br /> process using a thermosetting epoxy resin to chopped glass fiber. In-line fittings are fila- <br /> impregnate strands of continuous glass fila- ment wound. <br /> ments which are wound around a mandrel at a <br /> prescribed helix angle and under controlled ADHESIVES -Adhesive and curing agents shall <br /> tension. All pipe will be supplied with match- be UL Listed DS-8000 series adhesives. <br /> ing tapered T.A.B.TM (Threaded and Bonded) Consult Smith Fiberglass Products' installation <br /> coupling and spigot ends or T.A.B. spigot x manual No. B2160 for recommended heat cur- <br /> spigot ends. ing techniques. <br /> CONSTRUCTION JOINING TECHNIQUES <br /> 2"4" PIPE- RED THREAD IIA pipe shall have 2"-4" PIPE and FITTINGS -Pipe and fittings <br /> continuous glass fibers filament wound at a shall be joined with DS-8000 series adhesive <br /> 35%° helix angle in a matrix of epoxy resin. using matching tapered bell/coupling and <br /> Pipe shall be in compliance with ASTM D2310 spigot. Material to be installed in accordance <br /> and classified by its designation code. Pipe with Smith Fiberglass Products' installation <br /> shall meet all dimensional and performance manual No.,B2160. <br /> requirements, mechanical properties, and shall <br /> be classifiedwith the following designation TESTING <br /> codes: <br /> 2"-4" PRIMARY PIPE SYSTEMS -Primary pipe <br /> Size Designation Code at 73.4° F systems should be tested prior to use to assure <br /> 2"-3" RTRP-11 AE soundness of all joints and connections. <br /> 4" ,RTRP-11 AF Consult Smith Fiberglass Products' installation <br /> manual No. B2160. <br /> ITEMS <br /> 2"4" PIPE - Glass fiber reinforced filament <br /> wound pipe with matching tapered T.A.B. <br /> (Threaded and Bonded) coupling and spigot <br /> ends. Pipe to be factory prooftested at the fol- <br /> lowing pressures: <br /> 2" - 375 psig <br /> 3" - 265 psig <br /> 4" - 500 psig <br /> MEMBER <br /> Aa� fOOPBFg1 g <br /> 9��py — <br /> ®and T"'Trademarks of Smith Fiberglass Products Inc. COCopyright 1993 Smith Fiberglass Products Inc. <br /> PRINTED IN U.S.A.,7.5M1093 SMITH FIBERGLASS PRODUCTS INC.•A SUBSIDIARY OF A.O.SMITH CORPORATION <br /> 2700 W.65TH ST.,LITTLE ROCK,AR 72209-8592.501-568-4010 o FAX 501-568-4465 a TWX 910-722-7377 <br />