Laserfiche WebLink
Bulletin No.B21 06 <br /> SPECIFICATIONS 1,1993 <br /> GENERAL <br /> Y <br /> � 1 I <br /> tid y <br /> N , UL Lasted RELY THREAD' II <br /> Secondary Containment Piping <br /> SCONE 3"-5" FITTINGS - Compression molded two- <br /> piece fittings_shall be manufactured using a <br /> PIPE-Pipe shall be manufactured by Smith vinyl ester molding compound. The molding <br /> Fiberglass Products Inc. by a filament winding compound shall be reinforced with a mini- <br /> process using a thermosetting epoxy resin to mum of 60% chopped glass fiber. <br /> impregnate strands of continuous glass fila- <br /> ments which are wound around a mandrel at a ADHESIVES -Adhesive and curing agents shall <br /> prescribed helix angle and under controlled be either UL Listed DS-7000 or DS-8000 series <br /> tension. adhesives and filler. Consult Smith Fiberglass <br /> Products' installation manual No. B2160 for <br /> CONSTRUCTION recommended heat curing techniques. <br /> 3"-5" PIPE- RED THREAD IIA pipe shall have JOINING TECHNIQUES <br /> continuous glass fibers filament wound at a <br /> 35%• helix angle in a matrix of epoxy resin. 3"-5" PIPE and FITTINGS - Pipe shall be joined <br /> Pipe shall be in compliance with ASTM D2310 with either DS-7000 or DS-8000 series adhe- <br /> and classified by its designation code. Pipe sives. Fittings shall be joined with either DS- <br /> shall meet all performance requirements and 7000 or DS-8000 series adhesives and filler. <br /> mechanical properties, and shall be classified Material to be installed in accordance with <br /> with the following designation codes: Smith Fiberglass Products' installation manual <br /> No. B2160. <br /> Size Designation Code at 73.4° F <br /> 3" RTRP-IIAE TESTING <br /> 4"-511 RTRP-11 AF <br /> 3"-5" SECONDARY CONTAINMENT PIPE SYS- <br /> ITEMS TEMS -Secondary containment pipe systems <br /> should be tested prior to use to assure sound- <br /> 3"-5" PIPE - Glass fiber reinforced filament ness of all joints and connections. Consult <br /> wound pipe with Plain end by Plain end. Smith Fiberglass Products' installation manual <br /> Pipe to be factory prooftested at the following No. B2160. <br /> pressures: <br /> 3" - 265 psig (minimum) <br /> 4"-5" - 500 prig (minimum) <br /> MEMBER <br /> yAy <br /> TELL EQ9PBEBf BhC <br /> OO and'"'Trademarks of Smith Fiberglass Products Inc. ©Copyright 1993 Smith Fiberglass Products Inc_ <br /> PRINTED IN U.S.A.,7.5M1093 SMITH FIBERGLASS PRODUCTS INC.•A SUBSIDIARY OF A.O.SMITH CORPORATION <br /> 2700 W.65TH ST.,LITTLE ROCK,AR 72209-8592•501-568-4010•FAX 501-568-4465•TWX 910-722-7377 <br />