WP0040745 - Laserfiche WebLink

Home Browse Search

15 abandonment of a rejected borehole or well. The cost of abandonment shall be borne by the Contractor. D.Replacement of a Rejected Borehole or Well—Any rejected borehole or well shall be replaced by another hole adjacent to the first, or at a location as directed by the Engineer. 2.3.12 STANDBY TIME A. Scope 1. During the drilling operations, it may be necessary for the Engineer to perform work or analysis that will require the drilling crew and equipment to stand idle. In such an event, the Engineer shall request in writing the Contractor to cease operations and shall state the anticipated extent or duration thereof. The Contractor shall promptly cease operations if requested by the Engineer. The Contractor will be compensated for standby time at the rate listed on the Bid Form to the nearest half hour. 2. Within 12 hours after the completion of test hole drilling and logging operations, the Engineer will provide the final design of the wells. Such time will not be considered standby time. 2.3.13 RECORDS A. Scope--The item consists of preparing final records of the drilling and well construction. B. Well Completion Records -- Prior to final acceptance of a test hole or well, the Contractor shall prepare and deliver to the Engineer a Driller's Report in the format required by the State of California. C. Final Prints -- The Contractor shall prepare two (2) final prints of the daily tour reports, the drilling logs, and as-built construction drawings. 2.3.14 SITE CLEAN-UP AND RESTORATION A. Scope --This item shall consist of restoring the work site to its original condition after work is completed. B. Methods -- The Contractor shall keep the premises free from accumulations of waste materials, rubbish, and other debris resulting from the Work, and at completion of the Work, he/she shall remove all waste materials, rubbish, and debris from and about the well site as well as all tools, construction equipment, fuel tanks, machinery and surplus materials. The Contractor shall leave the site clean and ready for use by the Owner. The Contractor shall restore to their original condition all temporary work areas. Drill cuttings are to be properly disposed of offsite by the Contractor in accordance with these Technical Provisions. The Contractor is responsible for any damages to properties adjacent to the sites caused by drilling or construction activities associated with the Work described herein.