Laserfiche WebLink
San Joaquin County EHD <br /> February 7 , 2019 <br /> Page 3 <br /> Preparedness and Prevention <br /> Item 301 <br /> Metal fines on grinding bench and equipment were cleaned on the day of the inspection . Oil on floor <br /> around metal cutting lathe was cleaned on the day of the inspection . Recovered wastes were <br /> transferred to appropriate waste storage containers . Shop personnel were instructed to clean <br /> grinding bench and all oily areas daily . <br /> Attachments : Photo 301 . 1 , 301 . 2 — Showing grinding bench and equipment cleaned of metal fines <br /> and floor area around metal cutting lathe cleaned of oil . <br /> Labeling and Storage <br /> Item 601 <br /> 1 ) One 5-Gallon container of waste solids ( bead blast dust and grinding dust) was transferred <br /> from the facility by a licensed hazardous waste transporter on February 6 , 2019 . <br /> 2) One 30 Gallon container of waste solids ( corn cob absorbent contaminated with oil ) was <br /> transferred from the facility by a licensed hazardous waste transporter on February 6 , 2019 . <br /> 3) An agreement was made with Safety- Kleen for regular service and transport of wastes at 168 <br /> day intervals beginning on February 6 , 2019 . <br /> Attachments : Addendum 2 <br /> Uniform Hazardous Waste Manifest No . 006952732 SKS <br /> Safety- Kleen <br /> Dated February 6 , 2019 <br /> Addendum 3 <br /> LDR Notification Form No . 006952732 SKS <br /> Safety- Kleen <br /> Dated February 6 , 2019 <br /> Photo 601 . 1 — Showing hazardous waste accumulation area <br /> Photo 601 . 2 — Showing new empty container for grinding dust <br /> Photo 601 . 3 — Showing new empty container for absorbent <br />