Laserfiche WebLink
El <br />Used Oil Filters <br />Used oil filters are to be drained and stored in a 5 gallon bucket labeled <br />"Drained oil filters". There is no need for a Hazardous Waste Label because the <br />filters have been drained and do not contain any waste. <br />Solvent and cutting fluid <br />Here at LFW we use solvent for cleaning/ wiping down surfaces the shop. Cutting <br />fluid is to assist in the fabrication of a metal part. <br />Used Solvent and cutting fluid <br />If we do have waste solvent or cutting fluid the proper procedures is to: <br />-Drain into a 5 gallon bucket and label with a Hazardous Waste Label. <br />Please write the date on the accumulation line of the label or notify the office so <br />that it can be properly done. <br />Used Shop Rags <br />Around the shop we use shop rags to help keep the work environment clean. <br />Because our rags contain oil we must dispose of them properly in the USED <br />SHOP RAG receptacle located in the machine room. At the end of every work <br />shift you are responsible for the rags in your work area. Please gather your rags <br />and dispose of them in the proper receptacle <br />Ground Water Drain <br />There is (1) one ground water drain located in the center of the yard. We need <br />to be very careful when it comes to spills and ground contamination. <br />If there is a spill, and it might come in contact with our ground water drain, the <br />proper procedure is: <br />-Use floor absorbent and shop rags to prevent the spill from entering into <br />the ground water drain. <br />If you are not able to contain the spill and prevent ground drain contamination <br />please notify the office so that we can contact The Environmental Health <br />Department. <br />