Laserfiche WebLink
E 113 <br /> Testing Procedure <br /> Wet Fluid Pressure Test <br /> USE ONLY Sump Manufacturer suggested fluid. DO NOT USE BRINE(saline) <br /> 1. Close the(7) Drain Valve. <br /> 2. From the(4)fill the annulus space with fluid following the sump manufacturer Installation <br /> Manual. ATTENTION:purge air out from the annulus as much is possible or false test <br /> response can result. <br /> 3. Disconnect the(4) Push-in fitting from the filling device. <br /> 4. Connect the(11) Pressure Reservoir <br /> 5. Follow the procedure described above from the point 9. <br /> ATTENTION:Perform the Soapy Water test to watch out for gaseous leaks. <br /> Hydrostatic Test <br /> For the Hydrostatic test please refer to the Sump Manufacturer Integrity Test Procedure. <br />