Laserfiche WebLink
• • RECEIVED <br /> SWRCB,January 2002 Page of <br /> 6. PIPING SUMFEB 2 p P TESTING (� <br /> 115 <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard 00 <br /> LlOther(Spec) t4c4.1w ncc <br /> Test Method Used: ❑Pressure Vacuum X Hydrostatic <br /> C Other(Spec) <br /> Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 <br /> Sump# 1-Diesel Sump#2-Gasoline Sump# Sump# <br /> Sump Diameter: 46" 42" <br /> Sump Depth: 45" 63 %" <br /> Sump Material: Fiberglass Fiberglass <br /> Height from Tank Top to Top of 22„ Product 15" <br /> Highest Piping Penetration: Vapor/Vent 29" <br /> Height from Tank Top to Lowest 12" 24" <br /> Electrical Penetration: <br /> Condition of sump prior to testing: Dry Dry <br /> Portion of Sump Tested' Water Line 24" Water Line 31" <br /> Does turbine shut down when <br /> sump sensor detects liquid(both Yes Yes <br /> product and water)?* <br /> Turbine shutdown response time Not Alarmed Not Alarmed <br /> Is system programmed for fail-safe Yes Yes <br /> shutdown?' <br /> Was fail-safe verified to be No No <br /> operational?* <br /> Wait time between applying water <br /> 5 Minutes 5 Minutes <br /> and starting test: <br /> Test Start Time: 1:05 2:05 <br /> Initial Reading(R,): .001 .001 <br /> Test End Time: 1:35 2:35 <br /> Final Reading(RF): .001 .001 <br /> Test Duration: 30 Minutes 30 Minutes <br /> Change in Reading(RF-R,): 0 0 <br /> Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes <br /> Test Result: Pass Pass <br /> Was sensor removed for testing? Yes Yes <br /> Was sensor properly replaced and Yes Yes <br /> verified functional after testing? <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br /> ' If the entire depth of the sump is not tested,specify how much was tested. If the answer to aan of the questions indicated with an <br /> asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160) <br />