Laserfiche WebLink
n <br />Step 9: (See figure 8) <br />Assembly of the Jack Screw Kit is novo complete. <br />Proceed to installation of the OPW 61 SALP-EVR <br />Rotatable Product Adaptor and OPW 634TT Cap in <br />accordance with the OPW Installation Instructions <br />supplied with the product. <br />If a leak develops at the drop tube. Re -torque the <br />(3) screws on the Jack Screw. (Torque value: 3.0 ft - <br />lbs min. to 4.5 ft4bs max.) If this does not correct <br />the leak, check for burrs, dean the sealing surface <br />on the FSA -400 and replace the o -ring on the drop <br />tube. <br />NOTE: Loctite 242, thread locker, must be reapplied <br />each time the screws are adjusted. <br />Important: Leave these Instructions with tation <br />OR2rator. <br />P.O. Box 405003 * Cincinnati, Ohio 45240-5003 <br />14800-422-2525 Domestically <br />513-870-3315 Internationally <br />www.opw-fc.com <br />Copyright, 2002 - OPW Fueling Components Inc., Cincinnati, OH <br />Printed in U.S.A. p/n H14727PA — 9102 <br />OPW Fueling Components - Phase I Vapor Recovery System — VR -102-A <br />