Laserfiche WebLink
SWRCB. January 2002 Page 4 of 7 <br />6. PIPING SUMP TESTING 40 <br />Test Method Developed By: [ ] Sump Manufacturer [ X J Industry Standard [ ] Professional Engineer <br />[ ] Other (Specify) <br />Test Method Used: [ ] Pressure [ ] Vacuum [X ] Hydrostatic <br />Other (Specify) <br />Test Equipment Used: Equipment Resolution: <br />,,,Sump <br /># <br />Sump # <br />Sump # <br />Sum Diameter: <br />Sump Depth: <br />Sump Material: <br />Height from Tank Top to <br />Top of Highest Piping <br />Penetration: <br />Height from Tank Top to <br />Lowest Electrical <br />Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested 1 <br />Does turbine shut down <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />when sump sensor detects <br />[ ] NA <br />[ ] NA <br />[ ] NA <br />liquid (both product & <br />water)? <br />Turbine shutdown response <br />time: <br />Is system programmed for <br />[ ] YES [ ] NO <br />[ ] YES[ ] NO <br />[ ] YES [ ] NO <br />fail-safe shutdown? <br />NA <br />NA <br />NA <br />Was fail-safe verified to be <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />operational? <br />NA <br />NA <br />NA <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />Test Start Time: <br />Initial Reading (Rl): <br />Test End Time: <br />Final Reading (Rf): <br />Test Duration: <br />Change in Reading (Rf-R1) <br />Pass/Fail Threshold or <br />Criteria: <br />Test Result: <br />PASS FAIL <br />I PASS FAIL <br />f I PASS FAIL <br />Was sensor removed for <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />testing? <br />NA <br />[ NA <br />[ ] NA <br />Was sensor properly <br />replaced and verified <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />[ ] YES [ ] NO <br />functional after testing? <br />I[ ] N/A <br />[ ] N/A <br />[ ] N/A <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />N/A <br />1 If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or <br />"NA", the entire sump must be tested. (SWRCB LG -160) <br />