COMPLIANCE INFO_1995-2006 - Laserfiche WebLink

Home Browse Search

Underground Storage Tank Monitoring Plan-Page 2 . C. Pipeline Monitoring Line monitoring is performed using the following methods: (Check all which apply) ® Continuous electronic monitoring of piping sumps)/trench and other secondary containment low points. Leak Sensor Manufacturer: Veeder Root Model No.: 794380-208 Will a piping leak alarm trigger automatic shutdown of the pump(i.e. turbine)? ® Yes; ❑No. Will failureldisconnection of monitoring system trigger automatic shutdown of pump? ❑ Yes; ®No. ® Mechanical line leak detector(MLLD) that routinely performs 3.0 g.p.h. leak tests and restricts or shuts off product flow when a leak is detected. MLLD Manufacturer: Red Jacket,Vaporless Model No.: FXI,LD2000 ❑ Electronic line leak detector(ELLD)that routinely performs 3.0 g.p.h. leak tests. ELLDManufacturer: Model No.: Programmed line tightness tests: ❑ Minimum Monthly 0.2 g.p.h.; ❑ Minimum Annual 0.1 g.p.h. Will ELLD detection of a piping leak trigger automatic shutdown of the pump? Q Yes; ❑No. Will failure or disconnection of the ELLD trigger automatic shutdown of the pump? ❑ Yes; ❑No. ® Line tightness testing conducted: ® Annually; ❑ Every 3 years; ❑ Other(spec): ❑No product or remote-fill piping is connected to the UST(s). ❑ Piping is suction piping meeting all requirements for exemption from monitoring. [See 23 CCR§2636(a)(3)1 ❑ Other(specify): D. Dispenser Leak Detection: (Check all which apply) ❑No dispensers in system. ® Float and chain assembly in under-dispenser containment trips shear valve in case of leak. Assembly Manufacturer: Unknown Model No.: ❑ Continuous electronic monitoring of under-dispenser containment. Leak Sensor Manufacturer: Model No.: Will a leak trigger audible and visual alarms? ❑ Yes; ❑No. Will a leak alarm trigger automatic shutdown of the pump? ❑ Yes; ❑No. Will failure/disconnection of monitoring system trigger automatic shutdown of pump? ❑ Yes; ❑No. ❑ Dispenser housings are opened and fittings inside are visually inspected daily for leaks (required if under- dispenser containment is not installed). ❑ Other(specify): E. Monitoring Locations Included with this monitoring plan is a Site Plan which shows the general tank and piping layouts and the locations where monitoring is performed(i.e. locations of sensors, line leak detectors, control panels, etc.).