Laserfiche WebLink
v/ <br />Page 6 of 9 <br />111411(11101111.1\W ► U' <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Specif) <br />Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br />❑ Other ('Specify) <br />Test Equipment Used: <br />Equipment Resolution: <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Diameter: <br />Sump Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />Test Start Time: <br />Initial Reading (Ri): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF-Ri): <br />Pass/Fail Threshold or Criteria: <br />Test Result: <br />❑ Pass ❑ Fail <br />❑ Pass ❑ Fail <br />❑ Pass ❑ Fail <br />❑ Pass [:]Fail <br />Is there a sensor in the sump? <br />❑Yes ❑No <br />❑Yes [—]No <br />❑Yes ❑No <br />❑Yes ❑No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />❑Yes ❑No ❑NA <br />❑Yes ❑No [—INA <br />❑Yes ❑No ❑NA <br />❑Yes ❑No ❑NA <br />Was sensor removed for testing? <br />❑Yes ❑No [:INA <br />❑Yes ❑No ❑NA <br />❑Yes ❑No ❑NA <br />❑Yes ❑No ❑NA <br />Was sensor properly replaced and <br />verified functional after testing? <br />❑Yes []No❑NA <br />❑Yes ❑No ❑NA <br />❑Yes ❑No ❑NA <br />❑Yes ❑No ❑NA <br />Comments — (include information on repairs made prior to testing, and recommended folloN,-up,for failed tests) <br />SEP 0 8 2015 <br />"ENVIRONMENTAL <br />