Laserfiche WebLink
SWRCB, January 2002 <br />8. FILL RISER CONTAINMENT SUMP TESTING <br />Page _7_ of —8- <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Spec) <br />Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br />❑ Other (Spec) <br />Test Equipment Used: <br />Equipment Resolution: <br />Sump Diameter: <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Depth: <br />Height from Tank Top to Top of <br />Highest Piping Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to <br />testing: <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />starting test: <br />Test Start Time: <br />Initial Reading (RI): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF -RI): <br />Pass/Fail Threshold or Criteria: <br />+/-0.002" <br />+/-0.002" <br />+/-0.002" <br />+/- 0.002" <br />tx+�uIt�.. <br />Is there a sensor in the sump? <br />[] i'ass„ ❑.atk .. <br />❑ Yes ❑ No <br />❑ss' ❑Fail <br />❑ Yes ❑ No <br />[] Pass El laal <br />❑ Yes ❑ No <br />❑q>I>ass CIl <br />❑ Yes ❑ No <br />Does the sensor alarm when <br />either product or water is <br />detected? <br />[]Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes []No ❑ NA <br />Was sensor removed for testing? <br />❑ Yes ❑ No ❑ NA <br />[:]Yes ❑No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />❑ Yes ❑ No ❑ NA <br />Was sensor properly replaced and <br />verified functional after testing? <br />❑Yes ❑ No [:JNA <br />❑Yes [:]No ❑ NA <br />❑Yes ❑ No [JNA <br />❑Yes ❑ No ❑ NA <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />SITE HAS NO FILL SUMP INSTALLED <br />